SPHP Negative

SPHP Superpower High Power Voltage Regulator. Up to 1000W output ¶power: 10A at 100V! Use in a power amp, a computer music server, mixers,¶ anywhere a clean, quiet high power source is needed.

• Negative fixed output voltage to -45V or adjustable output to -100V
• ≥10A output current
• <10mΩ output impedance
• <5µV/Vout noise
• Requires custom wiring and mechanical placement for output transistor

SPHP Superpower High Power Voltage Regulator. Up to 1000W output ¶power: 10A at 100V! Use in a power amp, a computer music server, mixers,¶ anywhere a clean, quiet high power source is needed.

• Positive fixed output voltage from +5V to +45V or adjustable output +5V to +100V
• ≥10A output current
• <10mΩ output impedance
• <5µV/Vout noise
• Requires custom wiring and mechanical placement for output transistor

High voltage Superpower regulators, up to 450V and 500mA​​​​​​

The Superpower regulator is a high performance voltage regulator with a novel circuit design (US patent 8294440) to internally power its reference circuit with its own regulated output. A floating reference allows SPHV to deliver output voltage from 5V to 450V with low noise, low output impedance, high current and fast dynamic performance in a compact circuit that fits a standard IC footprint.

Superpower delivers current to a load with a clean dynamic waveform with minimum ringing or overshoot and settles quickly. Superpower works best without a pre-regulator, because a pre-regulator can limit the dynamic current available to the load.

SPLV17 1A Superpower Regulators , a low voltage high current regulator ¶using a variation of our patented Belleson super regulator design.

• Pinout matches LM317 and LM1117 type monolithic regulators.
• 1A output current
• Choose from 1.1V, 1.2V, 1.5V, 1.8V, 2.0V, 2.5V output
• 2.4V drop out at 1A
• 110dB ripple rejection at power line frequency
• 5µV total RMS noise, 20Hz-20kHz
• <10µsec recovery time for a 1A current step
• Positive and negative versions

As a fixed output regulator, this requires minor modifications when replacing an adjustable regulator such as LM317.

SPLV78 1A Superpower Regulators, a low voltage high current regulator using a variation of our patented Belleson super regulator design.

• Pinout matches LM78xx and LM340 type monolithic regulators
• 1A output current
• Choose from 1.1V, 1.2V, 1.5V, 1.8V, 2.0V, 2.5V output
• 2.4V drop out at 1A
• 110dB ripple rejection at power line frequency
• 5µV total RMS noise, 20Hz-20kHz
• <10µsec recovery time for a 1A current step
• Positive and negative versions

SPLV79 1A Superpower Regulators , a low voltage high current regulator ¶using a variation of our patented Belleson super regulator design.

• Pinout matches LM337 and LM79xx type monolithic regulators.
• 1A output current
• Choose from 1.1V, 1.2V, 1.5V, 1.8V, 2.0V, 2.5V output
• 2.4V drop out at 1A
• 110dB ripple rejection at power line frequency
• 5µV total RMS noise, 20Hz-20kHz
• <10µsec recovery time for a 1A current step
• Positive and negative versions

As a fixed output regulator, this requires minor modifications when replacing an adjustable regulator such as LM337.

SPX17 Regolatori di superpotenza con

• Tensione di uscita variabile con un singolo resistore, da +5 V a +30 V o fissa a 3,3 V
• Impedenza di uscita più bassa disponibile
• >= Reiezione ripple di 120 dB da CC a 80 kHz
• Corrente di uscita positiva 3A
• <1V caduta a 2A
• Rumore RMS <1μV/Vout, 20Hz-20kHz
• Tempo di recupero <1μsec per un passo di corrente da 250mA
• Disponibile anche la versione negativa
• I pin corrispondono a LM1117, LM317 e regolatori monolitici simili
• Non è necessario alcun cuscinetto termico isolante

"The best solution is a well-designed power supply in the audio gear itself." Ed Simon's conclusion of a 5 part article on cleaning up AC power lines in AudioXpress, Aug - Dec 2008.

Now you can have the best solution! Today's 24 bit and higher circuits demand the best voltage regulation, and the Belleson Superpower gives it to you. The patented design fully isolates almost all circuitry from the input voltage, providing the best line regulation possible. The innovative design delivers current faster and cleaner than ever before available, with the lowest possible output impedance!

SPX79 Superpower Regulators , our newest Belleson super regulator design. Fits TO-220 footprint and has

• Variable output voltage with a single resistor, -5V to -30V
• Lowest output impedance available
• 110dB ripple rejection from DC to 50kHz
• 2A output current
• <1.5V drop out at 1A
• <1µV/Vout RMS noise, 20Hz-20kHz
• <1µsec recovery time for a 250mA current step
• Positive version also available
• Pins match LM79xx, LM337 and similar regulators
• No insulating thermal pad needed!